Using The Remote Control - Yamaha RX-V3900 Bedienungsanleitung

Connections
o VOLUME level indicator
• Indicates the current volume level.
• Flashes while the mute function is on (page 38).
p Input channel and speaker indicators
L C R
SL LFE SR
SBL SB SBR
Input channel indicators
• Indicate the channel components of the current
digital input signal.
• Light up or flash according to the settings of the
speakers when this unit is in the automatic setup
procedure (page 30).
Presence speaker indicators
Light up according to setting for "Front Presence"
(page 76) in "Configuration" when this unit is in the
auto setup procedure (page 30) or the speaker level
setting procedure in the "Level" (page 77).
q ZONE2/ZONE3 indicators
Lights up when Zone 2 or Zone 3 is turned on
(page 108).
28
En
Presence speaker indicators
Input channel indicators

Using the remote control

The remote control transmits a directional infrared ray.
Be sure to aim the remote control directly at the remote
control sensor on this unit during operation.
Approximately 6 m (20 ft)
6LIGHT
Lights up the remote control buttons and the display
window (4).
Display window (4)
[1] [2]
ID 1
MAIN
ZONE 2
ZONE 3
[3]
[1] ID1/ID2 indicator
Indicates the currently selected remote control ID
(page 110).
[2] Transmit indicator
Appears while the remote control is sending infrared
signals.
[3] Zone indicators
Indicates the currently controlling zone (page 108).
[4] Information display
Shows the name of the selected input source that you
can control.
Infrared window (1)
Outputs infrared control signals. Aim this window at the
component you want to operate.
Remote control sensor
30 30
ID 2
[4]