Leica DMI3000B Bedienungsanleitung Seite 85

• Use the TL/IL function button to switch to
transmitted light (TL).
• Select the BF (bright fi eld) contrast method
by pressing the variable button BF.
Alternatively: press the variable button
CHANGE TL .
(For details on button assignments, please see
the identifi cation sheet.)
BF will appear on the LeicaScreen.
Motorized condensers will now move to the
bright fi eld position. Coded condensers must
be switched manually.
The fl uorescence fi lter turret will automati cally
go to an empty position or to the „A-TL" fi lter
cube.
Fig. 108 Function buttons (left side of stand)
1 variable function buttons
2 Open/close aperture diaphragm
3 TL/IL switching
4 Open/close fi eld diaphragm
5 Increase/decrease light intensity
1 2 3 4 5
• Insert a transmitted light specimen.
• Rotate an appropriate objective into place.
• Focus the image with the knob on the Smart-
Move or the focusing wheel and adjust the in-
tensity with the INT function buttons.
Fig. 109 Function buttons (right side of stand)
1 variable function buttons
8. Operation
1
85