Leica DMI3000B Bedienungsanleitung Seite 37

Manual Fixed Micromanipulation Stage
To install the attachable mechanical stage for the
manual fi xed micromanipulation stage (Fig. 24),
proceed as you would for the attach able me-
chanical stage of the standard stage.
The insert frames (Fig. 20a to c) differ at this
point. These are held by two screws on the at-
tachable mechanical stage and changed by re-
leasing the screws.
Fig. 21
Inserts for fi xed stages
Fig. 22
Glass insert for
3-plate cross-stage
and scanning stage
Fig. 23
Heater insert
Fig. 24 Installation of attachable mechanical stage
Fig. 25 Installation of attachable mechanical stage
6. Assembly
37