Leica DMI3000B Bedienungsanleitung Seite 48

6. Assembly
Next, attach the appropriate connector(s) (right,
left, straight) to the lamp housing mount. The
lamp housing or coupling is then mounted on the
connector, which is also held by four screws.
If a booster lens is included in the scope of deliv-
ery, insert it into the rear stand opening at the left
or right, depending on the stand model.
The booster slide has several positions:
1. Slide pulled out:
no effect
2. Depending on orientation of slide:
a) symbol • visible:
center orientation
The intensity of the fl uorescence is
increased by 50% in the center of the
fi eld of view (approx. 30% of the fi eld).
b) symbol visible:
The overall intensity is reduced by
25%. The entire fi eld of view is evenly
illuminated, however.
Fig. 55 Booster lens
48
Fig. 56 Booster lens in stand
1 Booster lens
Fig. 57 Hg-mercury burner
1