Selecting Input Modes - Yamaha RX-V1500 Bedienungsanleitung

PLAYBACK

Selecting input modes

This unit comes with a variety of input jacks. Do the
following to select the type of input signal you want to
use.
1
Select the input source.
INPUT
or
Front panel
2
Press INPUT MODE to select an input mode.
In most cases, use AUTO.
INPUT MODE
or
Front panel
V–AUX DVR/VCR2 VCR 1 CBL/SAT
SP
A
D V D A U T O
AUTO
Automatically selects input signals in
the following order:
1) Digital signals
2) Analog signals
DTS
Selects only digital signals encoded in
DTS. If no DTS signals are input, no
sound is output.
ANALOG
Selects only analog signals. If no
analog signals are input, no sound is
output.
*
If this unit detects a Dolby Digital or DTS signal, the
decoder automatically switches to the appropriate sound
field program.
y
• You can adjust the default input mode this unit selects when the
power is turned on (see page 64).
• DTS mode is recommended for playback of a CD or LD
encoded in DTS.
Note
If the digital output data of the player has been processed in any
way, you may not be able to perform DTS decoding even if you
make a digital connection between this unit and the player.
40
PHONO TUNER CD MULTI CH IN
V - AUX
CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
Remote control
TRANSMIT
SYSTEM
POWER POWER STANDBY POWER
TV AV
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
Remote control
DTV DVD MD/TAPE CD–R CD TUNER PHONO
VOLUME
L L
Input mode
*
Displaying information about the input
source
You can display the type, format and sampling frequency
of the current input signal.
1
Select the input source.
2
Set AMP/SOURCE/TV to AMP, then press
STRAIGHT/EFFECT so that "STRAIGHT"
appears in the display.
AMP
SOURCE
TV
3
Press k / n to display the following
information about the input signal.
dB
R
(Format)
in
fs
rate
flg
Note
The display shows "3/2/LFE" even when you play DTS-ES
Discrete 6.1 sources that include 3 surround channels.
PHONO TUNER CD MULTI CH IN
V - AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
STRAIGHT
then
EFFECT
ENTER
Signal format display. When the unit
cannot detect a digital signal it
automatically switches to analog input.
Number of source channels in the input
signal. For example, a multi-channel
soundtrack with 3 front channels, 2
surround channels and LFE, is
displayed as "3/2/LFE".
Sampling frequency. When the unit is
unable to detect the sampling
frequency "Unknown" appears.
Bit rate. When the unit is unable to
detect the bit rate "Unknown" appears.
Flag data encoded with DTS or Dolby
Digital signals that cue this unit to
automatically switch decoders.