Yamaha RX-V1500 Bedienungsanleitung Seite 84

ZONE 2/ZONE 3 (U.S.A., CANADA, U.K., EUROPE AND AUSTRALIA MODELS ONLY)
4
You can control the unit from Zone 2 or Zone
3 by using the input selector, STANDBY,
SYSTEM POWER, MUTE and VOLUME +/–
buttons.
SYSTEM
POWER POWER STANDBY POWER
TV AV
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
*
VOLUME +/– can be used only when OUTPUT VOL is
set to VAR. in SET MENU (see page 67).
5
Press SELECT k/n to exit from the Zone 2/
Zone 3 mode.
Notes
• The source in Zone 2 and the source available for recording are
always the same.
• "ZONE2" or "ZONE3" will appear in the display window only
when k is pressed, and "SYSTM" only when n is pressed.
82
SELECT
AMP
+ + +
SOURCE
TV VOL CH VOL
*
– – –
TV
A / B / C / D / E
TV MUTE TV INPUT MUTE
LEVEL SET MENU
PURE DIRECT
TITLE MENU
Turning this unit to either on or standby
SYSTEM POWER and STANDBY work differently
depending on the selected mode that appears on the
display window.
• When normal, Zone 2 or Zone 3 mode is selected, you
can turn the main unit, Zone 2 or Zone 3 to on/standby
individually.
• When System mode is selected, or when "AMP1" is
selected as the amplifier library (L:AMP) code, you
can turn the main unit, Zone 2 and Zone 3 to on/
standby simultaneously.
LCD display
Normal mode *
Name of component
"ZONE2" or "2:name
Zone 2 mode
of component"
"ZONE3" or "3:name
Zone 3 mode
of component"
System mode
"SYSTM"
*
"MAIN" appears for a few seconds when SYSTEM POWER
or STANDBY is pressed.
Special considerations for DTS software
The DTS signal is a digital bitstream. If you attempt to
send the DTS signal to the second/third room you will
only hear digital noise (that may damage your speakers).
Thus, the following considerations and adjustments need
to be made when playing DTS encoded discs.
For DVDs encoded with DTS
Only 2 channel analog audio signals may be sent to the
second/third room.
Use the disc menu to set the DVD player's mixed 2-
channel left and right audio outputs to the PCM or Dolby
Digital soundtrack.
For CDs encoded in DTS
To avoid unexpected noise, DO NOT USE the Zone 2/
Zone 3 feature with CDs encoded in DTS.
SYSTEM POWER/
STANDBY
Turns the main unit
on/standby
Turns Zone 2 to on/
standby
Turns Zone 3 to on/
standby
Turns everything (the
main unit, Zone 2,
Zone 3) on/standby