Troubleshooting - AsViva E3 Benutzerhandbuch

TROUBLESHOOTING

issue
no display
No speed display
No hand pulse signal or wrong
hand pulse signal
The handbar moves / shaking
Noise generated by moving
parts
No resistance adjustment pos-
sible / no resistance noticeable
In case of malfunctions, please remove the batteries and the AC adapter for a few seconds.
If the fault persists, please contact our service department.
If you have any questions about your fitness equipment, our employees at the
Service department will be happy to continue.
Possible cause
fault in the electric circuit
computer without function
Der Computer erhält kein Signal
vom Geschwindigkeitssensor
Sensor is faulty
Computer is faulty
The computer does not receive
a pulse signal.
The computer receives a weak
or periodically occurring pulse
signal.
Screws have come loose
Incorrect assembly
magnetic series
mechanism damaged
The belt has comeoff
solution
Check if the power connection is
guaranteed.
Replace the computer
Refer to the installation inst-
ructions and check all cable
connections
Consult the service department
Prüfen Sie die Handpulssensor-
leitungsstecker zum Computer
The hand pulse sensors or pul-
se receivers will not work if your
skin is extremely dry. Moisten
your hands with a little water
and try again.
Clean the hand pulse sensors or
pulse receivers to ensure good
contact between your body and
the pulse sensors.
Check all screws for tightness.
Remove the covering and ensu-
re the correct assembly of the
moving parts.
Remove the cover and check
the magnetic series.
Remove the cover and check
Remove the cover and check
65