AsViva E3 Benutzerhandbuch Seite 52

COMPUTER
2. Record the user's data of GENDER, HEIGHT, WEIGHT and AGE even cut off the power.
3. Dot matrix display showing your current status. (See fig 22)
4. Simulative ECG measuring the heart rate (See fig 23)
5. Display Speed(RPM), TIME, DIST., CAL., WATT, PULSE, LEVEL at the same time.
6. The computer will turn off automatically if there is no operation, speed signal and pulse
signal over
fig 22
4 minutes. Meanwhile,it will store your current exercise data and turn the loading resistance to
the minimum. Once you press any button or in motion, the computer will turn on automatically.
Buttons
1. ENTER:
● In „stop" mode(display STOP), press ENTER button to enter into program selection and
setting value which flash in related window.
A: When you choose the program, press Enter to confirm the one you like.
B: When in setting, press ENTER to confirm the value that you would like to preset.
● During the start mode(display START), press ENTER to choose display the speed or RPM, or
switch automatically.
2. START/STOP:
● Press START/STOP button to start or stop the programs.
● During any mode, hold down this button for 2 seconds to totally reset the computer.
3. UP:
● In stop mode and the dot matrix character flash, press this button (or rotate clockwise) to select the
program up. If the related window value flash, press this button (or rotate clockwise) to increase
the value.
● During the start mode(display START), press this button (or rotate clockwise) to increase the
training resistance.
4. DOWN:
● In stop mode and the dot matrix character flash, press this button (or rotate anticlockwise) to select
the program down. If the related window value flash, press this button (or rotate anticlockwise) to
decrease the value.
● During the start mode(display START), press this button (or rotate anticlockwise) to decrease the
training resistance.
5. PULSE RECOVERY:
● First test your current heart rate and show your heart rate value, press this button to enter into
pulse recovery testing.
● When you are in pulse recovery mode, press this button to exit.
6. RESET (IF HAVE)
● When in setting, press RESET to reset the value that you would like to preset.
● During any mode, hold down this button for 2 seconds to totally reset the computer.
NOTE:
① To press or rotate of UP, DOWN button should be followed by different model.
② It is suggested to cover your finger within the marked region to select functions in case
of any wrong action.
52
fig 23