Troubleshooting - AsViva RA14 Benutzerhandbuch

TROUBLESHOOTING

Problem
display is blank
No speed display
Kein Handpulssignal oder fal-
sches Handpulssignal
If you have any questions about your fitness equipment, our staff will help you.
Possible cause
Circuit malfunction
display broken
The computer / display receives
no signal from the speed sensor
sensor is damaged
computer / display broken
The computer / display receives
no signal from the hand pulse
sensor
The computer receives a weak
or periodically occurring pulse
signal
solution
check if the power connection is
guaranteed
Replace the display / computer
Refer to the assembly instruc-
tions and check all cable con-
nections.
Contact the service department
Check the hand pulse sensor
line connectors to the computer
The hand pulse sensors or
pulse receivers do not work if
your skin is extremely dry. Wet
your skin with a little water and
try again.
Clean the hand pulse sensors
or pulse receiver to ensure good
contact between your body and
the pulse sensors.
53