Using The Settings Menu - JUNO JB126D0 Benutzerinformation

Using Child Lock
The Child Lock prevents an accidental
operation of the oven.
When the pyrolytic cleaning is
turned on, the door is locked.
When you press a sensor field
the display shows the
message.
You can turn on this function when the
oven is off. Do not set a heating function.
Press and hold
time for 2 seconds. The signal sounds.
The display shows SAFE. The door is
locked.
Repeat the action to turn off the Child
Lock.
Using the Function Lock
You can turn on the function only when
the oven works.
The Function Lock prevents an accidental
change of the oven function.
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3 CLEANING REMINDER
4
KEY TONE
5 FAULTY TONE
6 DEMO MODE
7 BRIGHTNESS
8 SERVICE MENU
9 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold
The display shows SET1 and "1" flashes.
2. Press or
3. Press .
and at the same
1)
for 3 seconds.
to set the setting.
1. To turn on the function turn on the
oven.
2. Turn on an oven function or setting.
3. Touch and hold
same time for 2 seconds.
A signal sounds.
Lock comes on in the display.
To turn off the Function Lock repeat step
3.
If the Pyrolysis function works,
the door is locked. A message
comes on in the display when
you touch a sensor field.
You can turn off the oven when
the Function Lock is on. When
you turn off the oven, the
Function Lock turns off.

Using the settings menu

The settings menu lets you turn on or turn
off functions in the main menu. The
display shows SET and the number of the
setting.
Value to set
ON / OFF
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
Activation code: 2468
LOW / MEDIUM / HIGH
-
YES / NO
4. Press or
the setting.
5. Press .
and at the
to change the value of
17