Service Data; Energy Efficiency - JUNO JB126D0 Benutzerinformation

36
Problem
The display shows an error
code that is not in this table.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows "Demo".

Service data

If you cannot find a solution to the problem
yourself, contact your dealer or an
Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)

ENERGY EFFICIENCY

Product Information and Product Information Sheet*
Supplier's name
Model identification
Energy Efficiency Index
Energy efficiency class
Energy consumption with a standard load, conventional
mode
Energy consumption with a standard load, fan-forced
mode
Number of cavities
Possible cause
There is an electrical fault.
The demo mode is activa‐
ted.
on the front frame of the oven cavity. Do
not remove the rating plate from the oven
cavity.
.........................................
.........................................
.........................................
Remedy
• Deactivate the oven with
the house fuse or the
safety switch in the fuse
box and activate it again.
• If the display shows the
error code again, contact
the Customer Care De‐
partment.
Refer to "Using the settings
menu" in "Additional func‐
tions" chapter.
Juno
JB126D0 949498096
JB126S0 949498097
81.2
A+
0.93 kWh/cycle
0.69 kWh/cycle
1