Using The Settings Menu; Automatic Switch-Off; Cooling Fan - JUNO JB121D0 Benutzerinformation

Using the settings menu

The settings menu lets you turn on or turn
off functions in the main menu. The
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3
KEY TONE
4 FAULTY TONE
5 DEMO MODE
6 BRIGHTNESS
7 SERVICE MENU
8 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold
The display shows SET1 and "1" flashes.
2. Press or
3. Press .
4. Press or
the setting.
5. Press .
To exit the Settings menu, press
press and hold

Automatic Switch-Off

For safety reasons the oven turns off
automatically after some time, if a heating
function works and you do not change any
settings.
(°C)
30 - 115
120 - 195
200 - 245
250 - maximum
1)
for 3 seconds.
to set the setting.
to change the value of
or
.
(h)
12.5
8.5
5.5
3
display shows SET and the number of the
setting.
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
Activation code: 2468
LOW / MEDIUM / HIGH
-
YES / NO
The Automatic Switch-off does not work
with the functions: Light, Duration, Time
Delay, End Time, Slow Cooking.
Brightness of the display
There are two modes of display
brightness:
• Night brightness - when the appliance
is deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during
the night brightness (apart from
ON / OFF), the display goes back
to the day brightness mode for the
next 10 seconds.
– if the appliance is deactivated and
you set the Minute Minder. When
the Minute Minder function ends,
the display goes back to the night
brightness.

Cooling fan

When the oven operates, the cooling fan
turns on automatically to keep the
surfaces of the oven cool. If you turn off
17