Using The Settings Menu; Automatic Switch-Off - JUNO JB126S2 Benutzerinformation

When the pyrolytic cleaning is turned
on, the door is locked. When you press a
sensor field the display shows the
message.
1. Press and hold
oven.
2. Press and hold
time for 2 sec.
The signal sounds.
The display shows SAFE. The door is locked.
To turn off the Child Lock function repeat step
2.
11.3 Using the Function Lock
You can turn on the function only when the
oven works.
The Function Lock prevents an accidental
change of the oven function.
1. To turn on the function turn on the oven.
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3 CLEANING REMINDER
4
KEY TONE
5 FAULTY TONE
6 DEMO MODE
7 BRIGHTNESS
8 SERVICE MENU
9 RESTORE SETTINGS
1)
It is not possible to deactivate the tone of the ON / OFF sensor field.
1. Press and hold
The display shows SET1 and "1" flashes.
2. Press or
3. Press .
4. Press or
the setting.
5. Press .
18 ENGLISH
for 3 sec to turn off the
and at the same
1)
for 3 seconds.
to set the setting.
to change the value of
2. Turn on an oven function or setting.
3. Touch and hold
time for 2 seconds.
A signal sounds.
Lock comes on in the display.
To turn off the Function Lock repeat step 3.
If the Pyrolysis function works, the
door is locked. A message comes on in
the display when you touch a sensor
field.
You can turn off the oven when the
Function Lock is on. When you turn off
the oven, the Function Lock turns off.

11.4 Using the settings menu

The settings menu lets you turn on or turn off
functions in the main menu. The display
shows SET and the number of the setting.
Value to set
ON / OFF
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
Activation code: 2468
LOW / MEDIUM / HIGH
-
YES / NO
To exit the Settings menu, press
and hold .

11.5 Automatic switch-off

For safety reasons the oven turns off after
some time, if a heating function works and
you do not change any settings.
and at the same
or press