JUNO JB126D0 Benutzerinformation Seite 12

12
Oven func‐
tion
Moist Fan
Baking
Bread Baking
Keep Warm
How to set: Heating Functions
1. Turn on the oven with
Application
This function is designed
to save energy during
cooking. For the cooking
instructions refer to
"Hints and tips" chapter,
Moist Fan Baking. The
oven door should be
closed during cooking so
that the function is not in‐
terrupted and to ensure
that the oven operates
with the highest energy
efficiency possible. When
you use this function, the
temperature in the cavity
may differ from the set
temperature. The residu‐
al heat is used. The heat‐
ing power may be re‐
duced. For general ener‐
gy saving recommenda‐
tions refer to "Energy Ef‐
ficiency" chapter, Energy
Saving. This function was
used to comply with the
energy efficiency class
according to EN 60350-1.
When you use this func‐
tion the lamp automati‐
cally turns off after 30
seconds.
Use this function to pre‐
pare bread and bread
rolls with a very good
professional-like result in
terms of crispiness, col‐
our and crust gloss.
To keep food warm.
.
The display shows the set temperature,
the symbol and the number of the heating
function.
2. Press or
function.
3. Press or the oven starts
automatically after 5 seconds.
If you turn on the oven and do not set any
heating function or programme, the oven
turns off automatically after 20 seconds.
How to set: Temperature
Press or to change the
temperature in steps: 5 °C.
When the oven is at the set temperature a
signal sounds and the Heat up indicator
disappears.
How to check: Temperature
You can check the current temperature in
the oven when the function or programme
works.
1. Press .
The display shows the temperature in the
oven.
2. Press or the display shows again
the set temperature automatically after
5 seconds.
How to set: Fast Heat Up
Do not put food in the oven when the Fast
heat up works.
The Fast Heat Up is available only for
some heating functions. If Faulty Tone is
turned on in the settings menu, the signal
sounds if the Fast Heat Up is not available
for the set function. Refer to "Additional
functions" chapter, Using the settings
menu.
The Fast Heat Up decreases the heat up
time.
To turn on the Fast Heat Up press and
hold for more than 3 seconds.
If the Fast Heat Up is turned on the
display shows flashing bars.
to set a heating