Using The Settings Menu; Automatic Switch-Off - JUNO JB136D8 Benutzerinformation

16
Using the Function Lock
You can activate the function only when
the appliance operates.
The Function Lock prevents an accidental
change of the oven function.
1. To activate the function activate the
appliance.
2. Activate an oven function or setting.
3. Touch and hold
same time for 2 seconds.
An acoustic signal sounds.
Loc comes on in the display.
To deactivate the Function Lock repeat
step 3.
If the Pyrolysis function
operates, the door is locked. A
message comes on in the
display when you touch a
sensor field.
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3 CLEANING REMINDER
4
KEY TONE
5 FAULTY TONE
6 SERVICE MENU
7 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is turned off,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch or
3. Touch .
4. Touch or
of the setting.
5. Touch .
To exit the Settings menu, touch
touch and hold
and at the
1)
for three seconds.
to set the setting.
to change the value
or
.
You can deactivate the
appliance when the Function
Lock is on. When you
deactivate the appliance, the
Function Lock deactivates.

Using the settings menu

You can set the settings menu when the
oven is turned off.
The settings menu lets you turn on or turn
off functions in the main menu. The
display shows SET and the number of the
setting.
Value to set
ON / OFF
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
-
YES / NO

Automatic Switch-off

For safety reasons the appliance
deactivates automatically after some time
if an oven function operates and you do
not change any settings.
Temperature (°C)
30 - 115
120 - 195
Switch-off time (h)
12.5
8.5