Using The Settings Menu; Automatic Switch-Off; Cooling Fan - JUNO JB121D5 Benutzerinformation

14

Using the settings menu

You can set the settings menu only when
the appliance is deactivated.
The settings menu lets you activate or
deactivate functions in the main menu. The
Description
1 SET+GO
2 RESIDUAL HEAT INDICATOR
3
KEY TONE
4 FAULTY TONE
5 SERVICE MENU
6 RESTORE SETTINGS
1) It is not possible to deactivate the tone of the ON / OFF sensor field.
1. When the appliance is deactivated,
touch and hold
The display shows SET1 and "1" flashes.
2. Touch or
3. Touch .
4. Touch or
the setting.
5. Touch .
To exit the Settings menu, touch
touch and hold

Automatic Switch-off

For safety reasons the appliance
deactivates automatically after some time if
an oven function operates and you do not
change any settings.
Temperature (°C)
30 - 115
120 - 195
200 - 245
250 - maximum
After the Automatic switch-off, touch a
sensor field to operate the appliance again.
1)
for three seconds.
to set the setting.
to change the value of
or
.
Switch-off time
(h)
12.5
8.5
5.5
1.5
display shows SET and the number of the
setting.
Value to set
ON / OFF
ON / OFF
CLICK / BEEP / OFF
ON / OFF
-
YES / NO
The Automatic switch-off does
not work with the functions:
Light, Slow Cooking, Duration,
End, Time delay.
Brightness of the display
There are two modes of display brightness:
• Night brightness - when the appliance is
deactivated, the brightness of the
display is lower between 10 PM and 6
AM.
• Day brightness:
– when the appliance is activated.
– if you touch a sensor field during the
night brightness (apart from ON /
OFF), the display goes back to the
day brightness mode for the next 10
seconds.
– if the appliance is deactivated and
you set the Minute Minder. When the
Minute Minder function ends, the
display goes back to the night
brightness.

Cooling fan

When the appliance operates, the cooling
fan activates automatically to keep the
surfaces of the appliance cool. If you