Technical Specifications - Vitek VT-3602 BW Die Betriebsanweisung

ENGLISH
•
During the operation use only the pusher (1) sup-
plied with the unit; do not use any other objects to
push vegetables, never push vegetables or fruit
with your hands.
•
Pulp outlets control knob (32) changes the gap
between the screw (29) and the mesh filter
holder (30); turning the knob (32) in the direc-
tion «MAX – MIN» find the perfect proportion of
fruit and vegetable juice/squash and the amount
of pulp outlets.
•
If during the use of the juice extractor attachment
the amount of juice/squash decreased, switch
the meat grinder off, unplug it, dismantle the
juice extractor and wash the mesh filter.
•
After you finish operating, switch the meat
grinder off, pressing the button (12) «
unplug it.
•
To remove the juice extractor attachment (28)
press the lock button (5), turn the attachment
clockwise and remove it.
•
Dismantle the juice extractor attachment and
wash all parts.
MEAT GRINDER CARE
•
After you finish operating, switch the meat grinder
off, pressing the button (12) «
only after that you can disassemble it.
•
Unscrew the nut (17) and remove the installed
attachments (18, 19 or 20), the cutting plates (15
or 16) and the crossed blade (14) from the screw
(13) (pic. 11).
•
Press the lock button (5), turn the meat grinder
head (3) clockwise and remove it (pic. 12).
•
Remove the screw (13) from the meat grinder
head (3).
•
Remove the remains of the products from the
screw (13).
•
Wash all the used parts of the meat grinder with
warm water and a neutral detergent, then rinse
and dry thoroughly before assembling.
•
Use the cutting plate holder (21) to remove the
remaining meat from the cutting plate (15, 16)
openings (pic. 13).
Dismantling the juice extractor attachment
(28):
– Press the lock button (5), turn the juice extractor
(28) clockwise and remove it.
– Turn the lid (31) to the mark «OPEN» and remove
it.
– Remove the mesh filter (30) and the separator
(29) from the attachment (28) body.
– Wash all the details and dry them before assem-
bling.
VT-3602_IM.indd 8
•
Cover the meat grinder head setting place (4)
with the cover (22).
•
Clean the meat grinder body (6) with a slightly
damp cloth and then wipe dry.
•
Do not use solvents or abrasives to clean the
meat grinder body (6).
•
Provide that no water gets inside the meat
grinder body.
•
Before you put the accessories away for storage,
make sure that they are dry.
•
For easy storage of the attachments, the storage
compartment (9) is provided in the unit.
•
Put the attachments into the compartment
according to pictures 16-22. You may store the
cutting plates (15 and 16) and the nut (17) in the
pusher (21) body (pic. 13).
», and
•
Close the compartment with the lid (8).
•
Put the power cord into special compartment on
the meat grinder body bottom.
DELIVERY SET
Meat grinder with the attachments set inside - 1 pc.
Food tray – 1 pc.
Vegetable slicer attachments set - 1 pc.
Juice extractor attachment – 1 pc.
Cover – 1 pc.
Instruction manual – 1 pc.
», unplug it and

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50/60Hz
Rated power: 500 W
Maximal power: 2000 W
The manufacturer preserves the right to change
design and specifications of the unit without a pre-
liminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
8
This product conforms to the EMC-Requirements as
laid down by the Council Directive 2004/108/ЕС and
to the Low Voltage Regulation (2006/95/ЕС)
16.09.2013 15:37:58