Vitek VT-3602 BW Die Betriebsanweisung Seite 7

•
Insert the screw (13) into the meat grinder head
body (3), install "kebbe" attachments (19, 20) on
the screw (13), make sure that the ledges on the
attachment (20) match the grooves on the meat
grinder head body (3) and tighten the nut (17)
slightly. (pic. 9, 10).
•
Install the food tray (2).
•
Put the prepared casing base on the food tray
(2).
•
Insert the power plug into the mains socket, the
button (12) « » illumination will light up.
•
Switch the unit on by pressing the button (12)
« ».
•
Use the pusher (1) to supply the base for casing.
•
Cut the rolls of the required length.
•
After you finish operating, switch the meat
grinder off, pressing the button (12) «
unplug the unit and only after that you can disas-
semble the meat grinder.
•
To remove the meat grinder head press the lock
button (5), turn the meat grinder head (3) clock-
wise and remove it.
•
Unscrew the nut (17) and disassemble the meat
grinder head.
RECIPE
(Filling)
Lamb
Olive oil
Onion (shred)
Spice
Salt
Flour
•
Mince the lamb meat once or twice.
•
Fry onion in oil till it gets gold color, and then add
minced lamb meat, spice, salt and flour.
(Casing)
Lean meat
Flour
Spice
Nutmeg
Ground chilly pepper
Pepper
•
Mince the meat twice or thrice, mince a nutmeg,
and mix all the components.
•
More meat and less flour in the casing provide
better consistency and taste of the prepared dish.
•
Fill the rolls, clamp at edges, and shape as you
wish.
•
Deep fry the rolls.
VT-3602_IM.indd 7
»,
100 g
1½ table spoon
1½ table spoon
to taste
¼ tea spoon
1½ table spoon
450g
150-200 g
to taste
1 pc.
to taste
to taste
VEGETABLE SLICER
•
Install the vegetable slicer body (24) to the meat
grinder head setting place (4), and turn it coun-
terclockwise until bumping.
•
Install the grating attachment (25) or potato cut-
ting attachment (26) or slicing attachment (27)
into the vegetable slice body (24) till bumping
(pic. 14).
•
Insert the power plug into the mains socket, the
button (12) « » illumination will light up.
•
Switch the unit on by pressing the button (12) «
».
•
During the operation use only the pusher (23)
supplied with the unit; do not use any other
objects, never push vegetables with your fingers.
•
Use low screw rotation speed for processing soft
vegetables, for instance, tomatoes, to do this
press the low speed button (11), the button (11)
illumination will light up.
•
After you finish operating, switch the meat
grinder off, pressing the button (12) «
unplug the meat grinder and only after that you
can disassemble it.
•
To remove the vegetable slicer attachment (24)
press the lock button (5), turn the attachment
clockwise and remove it.
•
Wash the vegetable slicer parts right after the
use.
JUICE EXTRACTOR
Juice extractor attachment is intended for process-
ing soft vegetables or fruits (especially for making
tomato juice/squash or for processing «stone ber-
ries», for instance, red currant).
It is recommended to switch slow rotation speed
«SLOW» on when using the juice extractor attach-
ment, to do this press the button (11).
•
Install the juice extractor attachment (28) body to
the meat grinder head setting place (4), and turn
it counterclockwise until bumping.
•
Insert the plastic screw (29) into the juice extrac-
tor attachment (28) body.
•
Install the mesh filter holder (30) into the juice
extractor attachment (28) body so that the mesh
filter is on the bottom (pic. 15).
•
Cover the juice extractor attachment (28) with
the lid (31), when installing the lid turn it to the
mark "CLOSE" till bumping.
•
Place the food tray (2) on the juice extractor
attachment (28).
•
Insert the power plug into the mains socket, the
button (12) « » illumination will light up.
•
Switch the low speed on by pressing the «SLOW»
button (11), the button (11) will be illuminated.
7
ENGLISH
»,
16.09.2013 15:37:58