Specifications - Vitek VT-1677 W Betriebsanweisung

control with "0" and slightly pressing, turn it
anticlockwise.
•
Put the attachment body (24) into the body
jack (5), turn it anti clockwise until complete
locking (see the picture of the mincer ap-
pearance).
•
Put the food tray (2).
•
Insert the plug into the socket.
•
Switch on the unit by pressing the (8) button.
•
Switch on the low speed operation button (6),
the buttons lighting will change from the blue
one to the red one, indicating that the low
speed operation mode is on.
•
Use only the pusher (1), supplied with the
unit. Do not use foreign objects to push to-
matoes and berries. Never use your fingers
to push them.
•
Extraction control (28) has 3 operating posi-
tions. There are the corresponding symbols
on the lid (27). To adjust extraction degree,
depending on type of vegetables and fruit,
the control changes the position of the cone
attachment in accordance with the symbols
"1" "2" "3", pressing it to the feeder screw.
CARE
•
After use, switch off the mincer by pressing
the (8) button and disconnect the cord from
the power supply.
•
Press the clamp (4), rotate the mincer head
clockwise and remove it (see the picture of
the mincer appearance).
•
Unscrew the nut (14), remove the accesso-
ries (15, 16 or 17, 18), the grates (10 or 13) or
the blade (12) from the feeder screw (11).
•
Take the feeder screw (11) out of the head
(3).
•
Remove remains of the products from the
feeder screw.
•
The accessories (1, 2, 15, 16, 17, 18, 19, 25,
26, 27, 28) can be washed in a dish wash ma-
chine (pic. A).
•
For convenient and compact storage the at-
tachments (15,16, 17, 18) can be stored in-
side the pusher (1).
•
Wipe the mincer body (5) with a damp cloth.
1677 Instrukz.indd 7 1677 Instrukz.indd 7
•
To wash the extraction attachment press
the clamp button (4), on the body (5), turn it
clockwise (see the picture of the mincer ap-
pearance) and remove it.
•
Turn the lid (27) clockwise and set it to the
"OPEN" position, remove the cone filter at-
tachment (26) and the plastic feeder screw
(25).
•
Turn the extraction control (28) clockwise,
setting it to the "0"position and remove it.
•
Remove remains of the products from the
feeder screw.
•
Wash all removable parts in warm sudsy wa-
ter with a neutral detergent, rinse and dry
thoroughly.
•
Do not use solvents and abrasives to clean
the body (5).
•
Provide the liquid does not get into the body.
•
Before you take the accessories away for
keeping, oil the attachments (10, 13) and the
blade (12) with plant oil. This way they will be
protected from oxidation.

SPECIFICATIONS

Power supply: 220-240 V ~50/60 Hz
Maximal power: 1500 W
The manufacturer preserves the right to change
the design and the specifications of the unit
without a preliminary notification.
Life time of the unit is - 5 years
GUARANTEE
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to the
Law Voltage Regulation (73/23 EEC)
7
ENGLISH
01.08.2011 18:26:28 01.08.2011 18:26:28