Herunterladen Diese Seite drucken

diversey Taski swingo 2100 µicro Anleitung Seite 102

Vorschau ausblenden Andere Handbücher für Taski swingo 2100 µicro:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 73
Cleaning start
• If the machine is switched on and the
operator is sitting on the driver seat,
the machine starts moving as soon
as the gas pedal is depressed. If se-
lected, the brush unit is started and
the cleaning solution supply is open.
The speed is controlled by the posi
tion of the gas pedal. When releasing
the gas pedal, the machine is decel
erated until it stops and the parking
brake is activated. The supply of the
cleaning solution will be interrupted,
then the brush unit will be stopped
with a delay.
Notice:
The supply volume of the cleaning solution
is adjusted to the corresponding working
speed. (IntelliFlow)
Attention:
When working in restricted or narrow ar-
eas, it is recommended to press the slow
approach ON/OFF button. (Display lights
up) The maximum working speed is re-
duced, and thus so is the risk of accidents.
• Pressing this button once more will
override this restriction, and the dis-
play disappears.
Battery capacity - end of operational readiness
The battery level indicator provides information on the avail-
able operating time.
• If the red indicator begins to flash, approx. 5 minutes of
residual working time are left.
• After this period, the brush unit and – 30 seconds later –
the squeegee is lifted. The red display switches to continu-
ous light.
• Now 10 more minutes remain for driving the machine to the
charging station. Then the machine is automatically
switched off.
• In order to restart, the batteries must be fully charged.
100
Cleaning method
Direct working method:
Scrubbing and suction in one work step.
Indirect working method:
Applying the cleaning solution, scrubbing and suction in sev-
eral work steps.
-
Notice:
More precise details regarding the direct
-
and indirect working method can be found
on the respective method sheet.
Please contact your TASKI customer con-
sultant for further details.
Adjustment of the squeegee for indirect working method
Notice:
The machine guiding might be impaired in
case of special combinations of flooring/
contamination and cleaning product.
Optionally available wheels can improve
the traction of the machine on the floor.
Please contact your TASKI customer con-
sultant.
• Manually push the squeegee up-
wards until the position pin passes
through the position lock.
• Press the position lock to the right to
fix the squeegee.

Quicklinks ausblenden:

Werbung

loading