diversey Taski swingo 2100 µicro Anleitung Seite 101

Manual program start
• Press the Suction unit ON/OFF but-
ton.
The display lights up, the suction mo
tor starts and the suction nozzle is
automatically lowered to the operat
ing position.
• Press the Cleaning solution supply
ON/OFF button.
The display lights up.
The cleaning solution supply is start
ed when the brushes rotate.
• Select the intended dosage level by
pressing the +/- buttons from level 1
to 6.
Notice:
Diversey recommends sustainable work-
ing by determining the right product dos-
age. Overdosing or underdosing will lead
to unsatisfactory cleaning results.
Notice:
TASKI offers an automatic dosage feature
as an option. It is possible to mount it addi-
tionally. Please contact your customer ser-
vice.
• Press the Brush drive ON/OFF but-
ton.
The display lights up, the brush unit
is lowered and the engaging process
starts automatically.
ECO mode
• The ECO mode is activated by press-
ing the ECO mode ON/OFF button.
The rotational speed of the suction
engine is thus reduced and the dos
age of the cleaning solution is set to
level 2.
Notice:
If required, the level of the cleaning solu-
tion can be adjusted manually in ECO
mode. The ECO mode is suitable for
smoother floors without joints.
Function of the lateral swiveling
• Press the lateral swiveling button
-
-
• As a result, the brush unit and the
-
When reversing with lateral swiveling, please make sure that
the brush unit and squeegee do not get caught.
The brush unit and the squeegee as well as shelves and
other fixtures could be damaged.
Starting the machine using the program button
• By pressing the program button for
Notice:
By pressing a button again, the function
will be reprogrammed.
Notice:
The preset values can be adjusted at any
time during operation. The values preset
when switching off the machine are stored
and will be automatically activated when
restarting the machine.
Notice:
Pressing the program button when the
cleaning process is finished will start an
optimized program for the end of opera-
-
tion. See instructions on page 101 in the
"Automatic process" chapter.
Settings and activated functions are
saved.
ON/OFF.
squeegee will be swiveled out.
the next operation start or work step,
all machine functions are started on
the basis of the functional values last
used.
EN
99