Technical Characteristics - Acteon satelec Piezotome Solo Benutzerhandbuch

The top of the console incorporates:
- An LCD (Liquid Cristal Display) screen displaying dif-
ferent information (Fig. 1-5).
- A control keyboard enabling you to change the set-
tings of your device (Fig. 1-6).
The front face incorporates the handpiece cable
connector (Fig. 1-7).
The right side face incorporates the pump housing
(Fig. 1-8).
The back of the box incorporates the following ele-
ments:
- 1 mains connector with an earthing pin (Fig. 2-1).
- 1 pedal connector (Fig. 2-2).
- 1 fan (Fig. 2-3).
- 1 bracket support (Fig. 2-4).
- 1 mains isolating switch (Fig. 2-5).
- 1 potential equalizing terminal (Fig.2-6).
3.2 TECHNICAL DESCRIPTION
a) LCD screen / control keyboard
The device can be adjusted by applying moderate
pressure to the keyboard buttons.
Button positions (Fig. 3-1 to 5).
Item 1: Increase irrigation Á ow.
Item 2: Decrease irrigation Á ow.
Item 3: Flush/prime.
Item 4: Save, validate or select.
Item 5: Programme selection.
The LCD screen displays all information required by
the user.
Display positions (Fig. 3-6 to 9).
Item 6: Store in memory.
Item 7: Irrigation Á ow rate with associated bar graph.
Item 8: Programme with associated bar graph.
Item 9: Device status (ultrasound activated, error
detection).
b) Rear face of console
The mains connector (Fig. 2-1) with its earthing pin
allows the device to be connected to the electrical
network via a removable mains power cable.
The pedal connector (Fig. 2-2) allows the device to be
connected to the multifunction control pedal.
The fan (Fig. 2-3) protected by a metal grille ensures
the device always operates at optimum performance
level.
The bracket support (Fig. 2-4) allows the bracket to
be positioned.
The mains isolating switch (Fig. 2-5) is used to switch
the device on or off.
A potential equalizing terminal (Fig. 2-6) allows the
device to be connected to other installation equip-
ment as required.
c) Right-side face of console
The pump housing (Fig. 1-8) is designed to receive
SATELEC irrigation line cassettes.
An irrigation cassette is installed by lifting the pump
cover and inserting the cassette horizontally into the
purpose-designed housing.
d) Front face
The connector (Fig. 1-7) is designed to receive the
handpiece cable connector. Only the P
P S L handpiece shall be used.
IEZOTOME OLO ED
e) Control pedal
The control pedal allows professionals to work in a
completely sterile environment by preventing cross
contamination risks.
Once the various parameters have been set, the ope-
rator no longer needs to use the keyboard.
Pedal deÀ nition (Fig. 4-1 to 3).
Item 1: Ultrasound activation.
Item 2: Mode change (from d1 to d4).
Item 3: Arch.
f) Technical characteristics
Manufacturer: SATELEC
Name of device: P
IEZOTOME
Electrical supply:
- Voltage: 100 VAC to 230 VAC
- Frequency: 50 Hz / 60 Hz
- Nominal power: 150 VAC to 230 VAC
Operation:
Intermittent service: 10 mins ON / 5 mins OFF
S
IEZOTOME
S or P S L
OLO IEZOTOME OLO
or
OLO
ED
7