Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - Reely Firestar Bedienungsanleitung

1:10 modellauto nitro truggy 2wd p-240 st rtr 2.4 ghz
Vorschau ausblenden Andere Handbücher für Firestar:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen


13.

Troubleshooting

Even though the model is a state-of-the-art product, there can still be malfunctions or faults. For this reason, we would
like to give you some information on how to deal with possible problems.
Problem
The model does not respond.
Vehicle does not stop when the
throttle/brake lever is released
The vehicle does not drive in a
straight line.
Steering or driving movement
opposite to movement of
steering wheel and throttle on the
transmitter
The vehicle becomes slower or the
steering servo only shows weak
responses.
The vehicle responds unexpectedly,
drive or servos start without reason,
steering does not function properly.
40
Remedy
• Check the battery pack in the vehicle.
• Check the batteries in the transmitter.
• Check the connection of the battery pack.
• Check the on/off switch of the vehicle and the transmitter.
• Check the description on the crystals (same frequency?
transmitter and receiver crystals inserted in the correct devices?).
• Change the crystals to a different channel.
• Adjust neutral position for the drive function using the trim on the
transmitter.
• Adjust the steering function using the trim on the transmitter.
• Check the steering linkage.
• Check the play in the steering/wheel suspension and, if necessary,
replace worn parts.
• Check the servo reverse function on the transmitter and, if
necessary, switch it.
• Check the battery pack of the vehicle (allow the motor/speed
controller to cool down before inserting a new battery pack and
continuing to operate the vehicle!)
• Completely pull out the telescopic aerial of the transmitter.
• Unroll the aerial of the receiver and install it properly (in the
vertically mounted aerial tube).
• Check the batteries in the transmitter.
• Check the battery pack in the vehicle.
• Check the description on the crystals (same frequency?
transmitter and receiver crystals inserted in the correct devices?).
• Change the crystals to a different channel.
• The distance between vehicle and transmitter is too small or too
large.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis