Additional Documentation; Storing The Manual; Recommissioning; Version History - Stertil koni ST 1075-FWF Bedienungsanleitung

1.12

Additional documentation

The product contains components that have not been manufactured by Stertil but
that are a part of the installation. The documentation of these components is part of
the supplied documentation.
n
Note
For additional information or maintenance procedures always refer to the
documentation of the manufacturer.
1.13

Storing the manual

Stertil expects a copy of this manual to be available to the user(s), operators of the
vehicle lift and a copy should always be available when operating or maintaining the
vehicle lift.
1.14

Recommissioning

In the event of a recommissioning (e.g. relocation of the machine or a transfer of
ownership), you MUST contact Stertil and subcontractor to discuss the procedures,
terms and conditions, service contract, etc., so that the proper functioning and
safety of the machine after recommissioning can be guaranteed.
If Stertil is not involved in a recommissioning, then Stertil is not liable for any claims
of third parties arising from that recommissioning.
1.15

Version history

Every effort has been made to make this manual as accurate and complete as
possible. However, should the user(s) find any errors or omissions, it would be
appreciated if these were brought to the attention of Stertil. Please report any errors
or omissions to Stertil.
Also, during the lifetime of the machine, engineering improvements may result in the
need to revise this manual. It is then at the discretion of Stertil, if a revision/new
version of this manual is required.
The following table describes the main changes for each document version of this
manual.
Version
V0
A
Operation Manual (Version A)
Date Changes
September Original edition
2014
March 2015 Added R&TTE directive,
Update Operation Manual 1.8 and
1.16
9 Wireless