End Lock-Out/Tag-Out Procedure; Environmental Aspects; Disposal; Reach Declaration - Stertil koni ST 1075-FWF Bedienungsanleitung

c
Caution
Return all operating control(s) to the OFF position after verifying the isolation of the
machine.
The machine is now locked out.
2.5.2

End Lock-out/tag-out procedure

1. Make sure the service or maintenance is completed and the machine is ready to
return to normal operation.
2. Check the machine and the immediate area around to make sure that all
nonessential items have been removed.
3. Make sure that all components of the machine are operationally intact.
4. Make sure that all persons are at a safe distance from the machine.
5. Verify that the power switch is in the OFF position.
6. Remove the lockout devices.
7. Notify all personnel that the service or maintenance is completed and the machine is
ready for use.
2.6

Environmental aspects

2.6.1

Disposal

When the machine has reached the end of its useful life, the owner and/or user is
responsible for the safe disassembly of the machine and for the disposal of the
components, in accordance with the local laws or regulations.
2.6.2

REACH declaration

The REACH regulation became effective on 1st June 2007. The aim of the REACH
regulation is to ensure a high level of protection of human health and the
environment from chemical substances.
Stertil B.V. manufactures articles in compliance with current revision of the REACH
Regulation, and is downstream-user of chemical substances.
Stertil B.V. has the intention to fully comply to REACH regulation and has checked
its suppliers to make sure they comply with REACH requirements for all materials
and substances used in our products.
Stertil will provide relevant information e.g. Safety Data Sheet (SDS) on request.
Operation Manual (Version A) 20 Wireless