Lowering Onto The Mechanical Locks; Lowering Slowly - Stertil koni ST 1075-FWF Bedienungsanleitung

5.4.3

Lowering onto the mechanical locks

To lower into the mechanical locks, press button (4) only.
The column lifts will then lower no more than 35mm, until the safety pawls engage
the teeth in the safety lock profile. The drop-safeguard pawls can then no longer be
released. If the UNLOCK button (5) is now pressed, there will be no sound of the
pawls being released. Raise the column lifts again (to release the safety lock) so
that the column lifts can resume lowering.
d
Warning
Always lower the column lifts into the safety locks before carrying out any work
beneath the vehicle.
The buttons for raising, normal lowering and lowering into the safety locks are "dead
man's handle" buttons (hold to run). Operation continues as long as the button
remains pressed, and stops immediately once the button is released.
n
Note
In the event of a malfunction, consult the troubleshooting section in de Service
Manual.
5.4.4

Lowering slowly

Slow lowering can be used when removing gearboxes or for lowering the vehicle
carefully onto the axle supports. The other columns in the set automatically adopt
the same adjusted speed.
Main screen (example)
Operation Manual (Version A) 55 Wireless