Control Box; Pallet Lifting Mechanism; Retractable Wheels (R Models); Locking Feature - Stertil koni ST 1075-FWF Bedienungsanleitung

3.8

Control box

The control panel on the front of the control box has all functions necessary to
control the operation of the column lift. An emergency stop switch is also located on
the control panel. The components of the control panel and their functions are
described in chapter Operation (on page 27) of the Operator Manual.
3.9

Pallet lifting mechanism

The pallet lifting mechanism is fitted with two wheels, and is used for relocating the
column lift. These are mounted at the back to safeguard the column lift against
toppling over when it is being relocated. When relocating the column lift, the pallet
lifting mechanism raises the rear of the column off the floor so that it can be moved
more easily.
3.10

Retractable wheels (R models)

The front wheels are controlled simultaneously with the lifting and lower of the pallet
lifting mechanism in the R model.
3.11

Locking feature

If the hydraulic pressure fails while a vehicle is being raised, lowered or standing still
on the lifting system, a mechanical safeguard will ensure that the vehicle cannot fall.
The characteristic clicking sound indicates that the locking pawl is activated. When
lowering, the pawl is retracted by a solenoid.
3.12

Adjustable forks

The forks can be adjusted manually for a large number of tire sizes. A mechanical
locking feature prevents the forks from moving under a load.
Operation Manual (Version A) 26 Wireless