Operating One Single Column; Special Procedures - Stertil koni ST 1075-FWF Bedienungsanleitung

n
Note
An acoustic signal will be emitted for UP and DOWN movements in "PAIRED"
operation, because these are exceptional situations.
When setting up paired operation, the last two remaining columns will automatically
be defined as a pair. This means:
Set of 4: select 1 pair and the remaining columns automatically become a pair.
Set of 6: select 2 pairs and the remaining columns automatically become a pair.
Set of 8: select 3 pairs and the remaining columns automatically become a pair.
5.4.6

Operating one single column

1. Press the [SINGLE] button in the main screen. The button will become orange and a
message appears to confirm.
2. Press the [SELECT] button to confirm. The button will now turn green.
3. Press button 3 [RAISE] to raise the single column or press button 4 [LOWER] to
lower the single column.
n
Note
An acoustic signal will be emitted for UP and DOWN movements in "SINGLE"
operation because this is an exceptional situation.
5.5

Special procedures

The procedures listed below can only be carried out if you have access to the user
settings and have a login PIN code for the workplace.
Operation Manual (Version A) 58 Wireless