Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Follow the next described procedure to set a slower speed.
1.
Go to the main screen and see what the speed setting is.
- If the speed is set to 100%, this means the maximum speed is being used. In
that case, press the [SPEED] button once to use the slow speed (25%).
- If the speed already shows a lower percentage, then the speed has already
been made adjustable.
2.
If it is to be set back to its maximum speed, press the [SPEED] button again. The
indicator then jumps back to 100%.
5.4.5
Paired operation
n
Note
Setting paired operation (only possible if you have an even number of column lifts).
1.
Select the columns for one single axle to set this function (for example, the front
wheel axle).
2.
Press the [PAIR] button in the main screen. The [PAIR] button will become orange
and a message appears to perform "the pair" function.
3.
Press the [SELECT] button under the screen to confirm. The [PAIR] button now
goes green and the following screen appears.
Operation Manual (Version A)
56
Wireless
Werbung
Kapitel
Inhaltsverzeichnis
