Linking The Column Lifts; Control Box - Stertil koni ST 1075-FWF Bedienungsanleitung

d
Warning
Lifting one wheel of a floating axle will result in a dangerous horizontal displacement
of the column.
Hoisting floating axles
4.3

Linking the column lifts

Sets comprising 2 to 32 columns can be put together using a wireless controller.
Linking columns together is done through an identification procedure. The linked
columns are referred to as a set.
Several sets can be used next to one another in the same area. A maximum of 16
sets can be used.
The columns are absolutely identical. The columns work independently of the mains
supply. The mains supply is only required for loading the batteries.
n
Note
The operator must accept the number of columns in the set to avoid missing
registered columns in the set.
4.4

Control box

All functions of the lifting system are controlled from the control box on the column
lift.
Operation Manual (Version A) 29 Wireless