Control box
n
Note
Operate the panel only with your fingertips. Do not use sharp objects (such as
screwdrivers) to operate the control panel as this can cause damage and faults.
4.4.1
Emergency shutdown button
If the emergency shutdown button is pressed, all movement is immediately halted
(raising or lowering).
4.4.2
Starting
Each of the columns has a main switch. This switch has two positions:
0 (OFF)
This interrupts the power supply to the column lift.
1 (ON)
This switches on the power supply to the column lift.
Please refer to section Starting (on page 50) for a complete switch-on procedure.
4.4.3
Identification
An ID key allows any random set from a number of wireless columns to be linked
together. It is therefore practical to give all the engineers their own ID keys, so that
they can link columns together themselves as needed.
The ID keys have unique individual identification codes, so that different keys can
be used to start up multiple sets simultaneously with no problems.
Please refer to section Identification (on page 52) for a full identification procedure.
4.5
Settings screens
4.5.1
Introduction
The settings and information screen has a touch-screen capability that is used for
selecting the settings for the lifting column using buttons on the screen.
Operation Manual (Version A)
1. Emergency stop button
2. Settings and information screen
3. UP button
4. DOWN button
5. UNLOCK button
6. Accept button
7. ID key and reader
30
Wireless