Micro-Sd Card; Usb Memory Stick - Stertil koni ST 1075-FWF Bedienungsanleitung

4.6

Micro-SD card

The lifting system has a micro-SD card.
The micro-SD card is used for:
 the manuals and the parts list,
 the safety messages.
One file format is possible:
 Adobe "PDF" files;
These files must be unprotected if they are to be displayed properly.
The micro-SD card must be left in the device so that the data on it can be viewed at
all times. It is easy to update the manuals or messages: simply insert a different
micro-SD card with the edited files.
4.7

USB memory stick

A USB memory stick can be inserted into the PCB.
A USB stick can be used for adding information to a column, such as:
 list of users,
 settings,
 logo and contact details for the service organization,
 logo and contact details for the manufacturer.
The list of users and settings can be entered in just a single column lift and then
copied onto a USB memory stick by making a backup.
After that USB memory stick has been put in another column lift, the "restore"
procedure can be used to copy the data from it onto this column lift.
Logos and contact details are loaded into the column lift in the same way, i.e. by a
"restore".
Operation Manual (Version A) 45 Wireless