Service Instructions; Technical Data - Meister MOF1300-1 Originalbetriebsanleitung

5458020-Oberfraese_man 07.11.14 07:20 Seite 71
Ensure correct mains voltage (see
„Technical Data"). Or: Have carbon
brushes checked by approved
specialists.
• The routed surfaces are rough or
uneven? The router head is blunt or
misaligned. Or: The feed rate is too
high. Or: The speed is too low.
• The routed surfaces are dark
coloured? The router head is
overheating. Allow to cool down! Or:
The feed rate is too high. Or: The
speed is too high.
• The motor slows down considerably
during routing? The feed rate is too
high. Reduce feed rate!
• The motor runs irregularly, stops,
or starts with difficulty? Have the
carbon brushes exchanged by
authorised specialists.
• The router gets very hot? Critical
continuous operation under full load.
Stop work and allow machine to cool
down!
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in accordance with
the 2012/19/EU directive for
the disposal of electrical
and electronic waste, and
sent for proper and environ -
mentally-friendly recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types complying
with local rules and regulations. For
details, please contact your municipal
authority concerned.
11 – Service instructions
• Store the machine, operating
instructions and where necessary the
accessories in the original packaging.
In this way you will always have all the
information and parts ready to hand.
• Meister devices are to a large extent
maintenancefree, a damp cloth being
sufficient to clean the casing. Do not
drop electrical machines in water.
Please note additional hints given in
the operating instructions.
• Meister devices are subject to stringent
quality control. If however a functional
fault shoult occur, send the device to our
servicing address. The repairs will be
carried out in a short time.
• A brief description of the defect speeds
up the faulttracing and repair time. If
within the guarantee period, please
enclose the guarantee document and
the proof of purchase.
• In so far as a repair under guarantee
is not concerned, we will charge the
repair costs to your account.
PLEASE NOTE! Opening of the
device invalidates the guarantee
claim!
IMPORTANT! We point out
expressly that in accordance with
the Product Liability Act we do not take
responsibility for any damage caused by
our appliances, in so much that said
damage is caused by improper repair, or
original parts or parts released by us not
being used when parts are changed, or
repairs not being conducted by Meister
Werk zeuge GmbH, Customer Service or
an authorised specialist! The same
applies analogously to the accessories
used.
71