Operation - Meister MOF1300-1 Originalbetriebsanleitung

5458020-Oberfraese_man 07.11.14 07:20 Seite 67
Fig. 7-21: Using 2 bolts and 2 nuts, fit
curve fence to the parallel fence. Loosen
grip screw (1). Adjust wheel (2) so that it
can run along halfway up the end face
of the workpiece. Firmly tighten knurled
screw.
Fitting centring point
Application example:
Routing circular
workpieces.
Fig. 7-22: Fitting parallel fence reversed.
Using the knurled nut, fit the centring
point to the parallel fence.
8 – Operation
Safety check
Before use check that the router head
and any fitted parts are securely seated.
Connecting to power supply
Before use check that the mains voltage
is correct and the mains supply is fitted
with suitable fuses (see „Technical Data").
Insert plug in socket: the router is now
ready to operate.
LED working light
When the unit is switched on, the
LED working light also comes on
to ensure better vision and to
make it safer to work in dark areas. The
working light goes out when the On/Off
switch is released.
Switching on
Momentary operation
Figure 8-1: Press the On/Off switch (1).
The router starts. LED working light
switches itself on.
Permanent operation
Figure 8-1: Press the On/Off switch (1).
The router starts. LED working light
switches itself on. Press the locking
button (2) and release the On/Off switch.
Regulate the revolutions
Figure 8-2: Setting the revolution
regulator (1 = minimum,
max. = maximum revolutions).
Note: The brightness of the LED working
light depends on the revolutions.
Switching off
After momentary operation
Figure 8-1: Release the On/Off switch (1).
The router stops. The LED working light
goes out.
Risk of injury due to continuous
operation of router head! Wait
until the motor has come to a
complete standstill!
After permanent operation
Figure 8-1: Press the On/Off switch (1).
The locking button (2) disengages.
Release the On/Off switch. The router
stops. The LED working light goes out.
Risk of injury from still rotating
router head! Wait until motor
comes to a dead stop!
67