Safety Instructions Relating Specifically To The Equipment - Meister MOF1300-1 Originalbetriebsanleitung

5458020-Oberfraese_man 07.11.14 07:19 Seite 63
• Keep the handles dry, clean and free
of oil and grease.
• Check the power tool for any
damages.
• Before continuing to use the power
tool, protective mechanisms and
lightly damaged parts should be
carefully examined for perfect and
proper functioning.
• Check whether parts have been
damaged. All parts must be mounted
correctly and meet all requirements in
order to ensure perfect operation of
the power tool.
• Damaged protective mechanisms and
parts must be repaired or replaced
properly by an authorised specialist
workshop if no other course of action
is specified in the operating
instructions.
• Damaged switches must be replaced
by a customer service workshop.
CAUTION! The use of other tool
inserts and other accessories
may pose a risk of injury.
6 – Safety instructions
relating specifically to
the equipment
• Use only sharp, undamaged router
heads!
• The router must always be started
first before the router head is applied
to the workpiece!
• When working, ensure that the base
plate is resting squarely on the
surface!
• When working, feed the router
carefully and evenly. Forcing the feed
rate may lead to accidents and
premature wear to the router head!
• empty connected vacuum cleaner at
regular intervals. Blocked extractor
ducts cause chips to collect in the
work zone!
• Do not put the router down until the
motor has come to a dead stop.
• Do not fasten the router to a jig or
fixture. It is not intended for stationary
use!
• Guide the vacuum-cleaner hose
so that it does not obstruct the
routing work and cause the operator
to trip!
Fire prevention
Fire-preventive measure when machining
wood: keep a powder- or CO
extinguisher handy!
Safety marking
The symbols on the housing mean the
following:
Type No. and year of
manufacture
Type designation
Important! Wear goggles!
Important! Wear ear
protectors!
Important! Wear a
breathing mask!
-
2
63