Technical Features - Bartscher 600-Serie Bedienungsanleitung

When cooking, avoid placing pots and pans and/or crockery on the hotplate that are partially resting

on the stainless steel part of the hob, or the steel may overheat.
When not in use, make sure the appliance is disconnected from the electric mains.

ATTENTION! The manufacturer declines any liability for damage caused by wrong
installation, tampering, making unauthorized changes, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or not
observing the instructions in this booklet
For the installer
-
The functioning of the appliance has to be explained and shown to the user. After ensuring that
everything is clear, the instruction booklet has to be handed over to the user.
-
The user has to be informed that any building modification or restructuring that may in any way
modify the air supply necessary for combustion makes it necessary to carry out another check of
the functionality of the appliance. In particular, every variation (additional power) in the
appliances in the room may modify the balance of the gas supply in the room. That means that
appliances may be fed with gas at lower gas pressure and rate than those provided for and they
may give worse performance.
The following instructions for set up and functioning refer to gas and mixed appliances belonging to
categories I I I
2H, 3P,
Butane/Propane (G30-G31) of 30/50 mbar and Methane (G20-G25) of 20/25 mbar. The data plate
(fig. 4 – p. 3) showing all the appliance information is to be found inside the right or left side of the
control panel, depending on the model.
The appliances have been checked in accordance with the European directives down below:
2014/35/UE - Low Tension (LVD)
2014/30/UE - Electromagnetic Compatibility (EMC)
2006/42/EC - Machinery directive
2011/65/CE - Rohs
2009/42/CE - Gas Appliances
And the particular reference norms.
Declaration of compliance
The manufacturer declares that the appliances of their production meet the above mentioned EEC
directives and requires that installation be done observing the norms in force, particularly regarding
the system for letting out fumes and air exchange.
Gas cooking top
Sturdy structure of stainless steel on four feet which make it possible to regulate the height. The
outside finishing is of stainless steel with Chromium-Nickel 18/10.
Each burner of the cooking top is provided with a safety gas cock, which enables the user to
regulate the output from maximum to minimum. Safety is ensured by a thermocouple kept active by

TECHNICAL FEATURES

, II II
3B/P HS3B/P, 2E3PB/P
DESCRIPTION OF APPLIANCES
II , II , II
2H3+ 2H3B/P 2L3B/P
Pag. 39/63
with a power pressure for