Bartscher 600-Serie Bedienungsanleitung Seite 46

In order to put out the main burner, the knob has to be turned to the right into the OFF position
Electric oven (fig. 14 – p.5)
In order to switch on the electric oven, choose the desired cooking temperature thanks to the
thermostat (1); the two lamps light on. The green light stays on all the time to show that there is
tension, while the orange one lights off as soon as the oven reaches the right temperature.
In order to switch off the electric oven, turn one of the two control knobs into the 0 position.
Abnormal functioning
If for any reason, the appliance does not start or stops working during use, check that the energy
supply and the control knobs are set correctly; if all is regular, call customer service.
Some problems and their possible solutions
Problem
The main burner does not light on
High minimum
Slow and/or inadequate heating
No heat
No indicator light
Slow and/or insufficient heat
- Check that gas inlet pressure is the same as that shown in
table at pages 44
- Check that the nozzle of the burner is not blocked
- Check that the igniter plug is well fixed and connected
- Check that the igniter plug is intact
- Check that the igniter cable is intact
- Check that the piezoelectric igniter is intact and
functions correctly
- Check the gas valve
- Check that gas inlet pressure is the same as that shown in
table at pages 44
- Check the by-pass
- Check the gas valve
- Check that gas inlet pressure is the same as that shown in
table at pages 44
- Check that the nozzles installed are in accordance to
tables 2-3-4-5-6-7-8-9
- Check the gas valve
-
Check the power supply
- Check the condition of the heating element
-
Check the thermostat
-
Check the safety thermostat
-
Check the power supply
- Check the light bulb
-
Check the setting of the thermostat
- Check the condition of the heating elements
-
Check the quantity of food to be cooked
Pag. 45/63
Possible solution
●
.