Technical Features - Bartscher 600 series Bedienungsanleitung

 ATTENTION! No appliance with a damaged glass ceramic hotplate (broken, cracked or split)
should be used under any circumstances, but should be brought immediately to an authorised
technical assistance centre.
 The ceramic glass cooker should not be used as a storage surface, since it could be accidentally
switched on and damage objects placed on it.
 Ensure that no hard objects fall on the glass of the cooker, since, depending on the type of impact,
this could damage it.
 When cooking, avoid placing pots and pans and/or crockery on the hotplate that are partially resting
on the stainless steel part of the hob, or the steel may overheat.
 When not in use, make sure the appliance is disconnected from the electric mains.
ATTENTION! The manufacturer assumes no liability for damage resulting from faulty
installation, tampering, unauthorized modifications, improper use, poor maintenance,
installation of non-original spare parts, not observing local norms, incorrect use or failure to
observe the instructions in this booklet
For the installer
 The functioning of the appliance has to be explained and demonstrated to the user. After
ensuring that everything is clear, the instruction booklet should be given to the user, who must
keep it.
 The user must be informed that any building modification or restructuring that may in any way
modify the air supply necessary for combustion, makes it necessary to carry out another check of
the functionality of the appliance.
The data plate (fig. 5 – p. 4) showing all the appliance information is located inside the control
panel, either on the right or left hand side, depending on the model.
The appliances have been checked in accordance with the European directives down below:
2014/35/UE - Low Tension (LVD)
2014/30/UE - Electromagnetic Compatibility (EMC)
2006/42/CE - Machinery directive
2011/65/UE - Rohs
and appropriate reference standards.
Declaration of compliance
The manufacturer declares that their appliances meet the above-mentioned EEC directives and
requires that installation be performed in observance of current regulations, particularly those
covering the exhaust and air-exchange system.

TECHNICAL FEATURES

Pag. 27/45