Operating The Ultimate Climate; Body Zone Heating Control - Auping Ultimate Climate Gebrauchsanweisung

4. Operating the
Ultimate Climate
fig. 4
The mattress heating is controlled with the
remote control (fig. 4). This allows you to pre-
heat the mattress before going to bed, to heat
the mattress while you are sleeping (maximum
setting 5) or to dry it after getting up.
G
fig. 5
You can adjust the temperature level of the
foot zone (G) and the body zone (H)
independently from each other (fig. 5).
The pilot lights on the remote control indicate
the set heating level. It takes about two hours
to heat the mattress to the pre-set
temperature level. Please keep this in mind
and activate the heating function in time
before going to bed.
The maximum heating period is limited to 12
hours. After 12 hours the heating system will
be switched off automatically.
2232 BinnenW.pdf - pag.29
H
LET OP !!! Lage resolutie!
People lose about a quarter of a litre of
moisture at night while sleeping. The mattress
largely absorbs this moisture. Activate the
drying function after getting up in the morning
to keep the mattress in top condition.

4.1 Body zone heating control

A
H
Setting the heating level
The heating level can be adjusted with the –
and + buttons A and B.
The pilot lights at the top indicate the set level.
The maximum heating level for use during the
night while sleeping or lying down is level 5.
(Maximum of 5 indicator lights on the remote
control being lit up.)
B
fig. 6
fig. 7
GB29
August 11, 2006