Auping Ultimate Climate Gebrauchsanweisung Seite 40

5.3.4 Interim deviation from the program
While the program of the Ultimate Climate
Advanced is activated it will always determine
at what time and at which level the heating and
drying process switches on and off. You may
however wish to deviate from these program
settings. In that case you can enter settings
manually while the program continues to
operate in the background. The manual
settings remain valid until the next time that
the mattress is activated or deactivated
automatically by the program.
Example 1: Changing from programmed
preheating to manual heating
If you generally go to bed at about 11:00 p.m.
you can program the Ultimate Climate
Advanced so that heating starts at 9:00 p.m.
When you get into bed you can turn the level
lower or to zero by hand.
The heating will continue at this level until the
program switches the heating off, for example
at 8:00 a.m. the next morning.
GB38
2232 BinnenW.pdf - pag.38
Example 2: Interrupting automatic drying
It may occur that you are still lying in bed when
the program starts the drying process. For
example if you are ill or want to get up later
than regularly.
In that case you can switch the drying process
off by hand by pressing the drying key. The
program will then skip the drying process for
a day.
The next day the program will start drying at
the programmed time.
Example 3: Adjusting the program in the
case of long-term absence.
If you are away from home for a longer period,
for example when you are on holiday, you can
switch off the heating and drying function of
the Ultimate Climate Advanced temporarily. To
do so, set the starting time for heating and
drying to --:--. The mattress will then not dry or
heat. When you return you can reset the
program.
LET OP !!! Lage resolutie!
August 11, 2006