Introduction; Structure Of The Mesh Base; Technical Specifications - Auping K2 Typ 11 Gebrauchsanweisung

1. Introduction

You have chosen a K2 mesh base; tailored to
suit your own wishes. The ways in which the
mesh bases can be adjusted differ per type.
The mattresses differ in their use of
materials and their functions.
All Auping mattresses are suitable for the
adjustable K2 mesh bases. The mattress is
adapted to the weight distribution of the
body by means of comfort zones. The
shoulder zone is somewhat more pliable,
while the sitting area has been extra
strengthened. This zoning gives extra
comfort and better support for both sitting
and lying on the mattress.
Thanks to its smooth fibres, the underside of
the mattress glides over the back section of
the mesh base during adjustment.
The mattress is fastened to the mesh base
with mattress connectors. Thus, the
mattress cannot slide down while adjusting
the bed and it will exactly follow the
movements of the mesh base.
The mattresses are constructed asym-
metrically from various materials and
therefore do not need to be turned.
GB10
_008EP_3155 BinnenW.pdf - pag.10
Type 11/22

1.1 Structure of the mesh base

Horizontal/Manual adjustment
1. Manually adjustable foot end*
2. Manually adjustable back section*

1.2 Technical specifications

Weight (example)
- K2 type 11, dimensions 90 x 200: 14 KG
- K2 type 22, dimensions 90 x 200: 25 KG
*If applicable
LET OP !!! Lage resolutie!
2 1
fig. 1
November 21, 2007