Auping Ultimate Climate Gebrauchsanweisung Seite 39

F. Adjust drying process starting time
A
–
P
fig. 30
C
Press the button (F)
The pilot light below the symbol
illuminated.
The text START DRYING and the time at which
drying commences will appear in the display.
Adjust the starting
– and + buttons (A, B, C or D).
G. Adjust current time
(daylight saving time)
A
–
P
fig. 31
C
Press the button (F)
2232 BinnenW.pdf - pag.37
START DRYING
11:00 +
start end now
P
F
.
P
time with
CURRENT TIME
+
13:00
start end now
P
F
.
P
LET OP !!! Lage resolutie!
If you live in a country with changing
summer/winter time, you must adjust the
current time setting manually at the respective
B
changing dates. A manual time re-set is also
necessary when a power cut has lasted longer
than 30 minutes.
The pilot light below the symbol
illuminated.
The text CURRENT TIME, for example 13.00,
will appear in the display.
Check that this is the correct time.
Adjust the time if necessary with the – and +
D
buttons (A, B, C and D).
H. Save the settings
will be
the
P
B
Press the button (F)
The settings are saved.
The text SETTINGS ACTIVATED will appear in
the display.
The green pilot light below the P will remain
illuminated.
D
SETTINGS
ACTIVATED
start end now
P
F
.
P
will be
now
fig. 32
GB37
August 11, 2006