Exiting The Dcc - NEC PH3501QL Installationsanleitung

7. Check that all of the results are "OK".
If Different is displayed
Return to step 1 and execute the update again.
NOTE
• When, after having mounted the LV unit, updating the projector for the purpose of version upgrade, instead of the projector's
initial settings, set the projector's IP address to a connection destination, and execute from step 1 through step 7.
The projector's IP address can be checked on the setting of WIRED LAN from the onscreen menu.
• The update for the purpose of the initial settings must be done before mounting the LV unit.

2-2-5. Exiting the DCC

1. Click "File".
The [File] menu will appear.
2. Click "Exit".
The DCC will close.
3. Turning off the Projector
Follow the procedure at "4-6 Turning off the Projector" (→ page 85) to turn off the projector's power, then discon-
nect the AC power.
TIP:
• To check the projector's information and log using the DCC, see "7-8.Using the DCC's functions" (→ page 118).
2. Configuring the projector's initial settings
58