NEC PH3501QL Installationsanleitung Seite 83

2. Click the "Full-Auto" button.
3. Select the "nprelease" file stored on the local drive, then click the "Open" button.
A progress bar is displayed and the update begins. The update proceeds automatically.
NOTE
• During updating, the projector turns on automatically. After that, the projector automatically returns to the standby state.
4. Check the results of the update.
If "Error" is not displayed on the screen bottom of column, the update has completed successfully.
Once the update is completed, a message such as the following appears below the screen.
If the update is successful: Update Success
If the update is unsuccessful: Update has failed
5. Once the update is successful, click the "Exit" button.
The All Update screen closes.
6. Click the "Update End" button.
2. Configuring the projector's initial settings
57