NEC PH3501QL Installationsanleitung Seite 51

• C2 connection
AC power is provided to the projector power supply and the light power supply by separate cables.
AC power supply
equipment
AC power supply
equipment
AC power supply equipment
Do not connect AC power supply voltages to the projector other than those indicated below.
When using with a C1 connection
• 200 - 240 V AC, single phase, 50/60 Hz
When using with a C2 connection
• 200 - 240 V AC, single phase, 50/60 Hz (projector power supply)
• 200 - 240 V AC, single phase, 50/60 Hz (light power supply)
Breakers
When connecting the AC power supply from the power supply equipment of the building to the projector, be sure to
connect it through a breaker. The capacity of the breaker must be as indicated below.
When using with a C1 connection
• Power supply for projector + power supply for light
200V-240 V AC: Input current 40A, Inrush current 150A or higher @10msec
When using with a C2 connection
• Power supply for projector
200V-240 V AC: Input current 10A, Inrush current 60A or higher @10msec
• Power supply for light
200V-240 V AC: Input current 40A, Inrush current 150A or higher @10msec
Electric outlet
Breaker
AC power supply cable
Breaker
1. Before Setting Up Your Projector
AC power supply
cable
Input Selection
25
C2 connection
Projector
(Main unit)
Light power
supply unit