NEC PH3501QL Installationsanleitung Seite 53

WARNING
• The power supply unit handles large electrical currents. To maintain safety, use wires with the specifications as
shown in the following table, and affix to the terminals at the designated attachment torque.
• Always use solderless terminals with the dimensions as shown in the following diagram.
• The use of parts with dimensions other than as designated creates a risk of the AC power supply unit short
circuiting due to the terminal block generating heat and melting because the terminal block of the light power
supply unit cannot be attached correctly.
• Power supply terminal L, N (Black)
AC power is provided to the projector power supply and the light power supply by a single cable.
Thickness of compatible
wiring (using solderless ter-
minal)
Solderless terminal dimen-
sions
Tightening torque
Solderless terminal dimen-
sions
Solderless terminal recom-
mended part (J.S.T parts)
J.S.T: J.S.T. Manufacturing Co. Ltd.
JIS
14 mm 14 mm
2
M5 x 10
2.0 to 2.5N·m
Max 12.2
Max 5.8
Unit: mm
Model R8-5
1. Before Setting Up Your Projector
IEC/EN
AWG6 or
2
AWG8
Min ⌀6.1
Min 4.5
When using AWG6: Model R14-5
When using AWG8: Model R8-5
27
UL CSA
AWG6 or
AWG8
Min 1.0
-Max 2.0
Min 1.0
-Max 2.0