NEC PH3501QL Installationsanleitung Seite 7

Caution on Carrying the Projector/
Handling the Optional Lens
When installing / removing a lens, shut down the AC
power to the projector.
When shipping the projector with the lens, remove the
lens before shipping the projector. Always attach the
dust cap to the lens whenever it is not mounted on the
projector. The lens and the lens shift mechanism may
encounter damage caused by improper handling during
transportation.
Cable information
CAUTION
For HDMI, DisplayPort, BNC, LAN, RS232C, 3D, and
GP I/O, please use a shielded cable.
Use of other cables may cause interference with radio
and television reception.
Remote Control Precautions
• Handle the remote control carefully.
• If the remote control gets wet, wipe it dry immediately.
• Avoid excessive heat and humidity.
• Do not short, heat, or take apart batteries.
• If you will not be using the remote control for a long
time, remove the batteries.
• Ensure that you have the batteries' polarity (+/−)
aligned correctly.
• Do not use new and old batteries together, or use dif-
ferent types of batteries together.
Handling the Battery
• Take care when handling the battery, as it could cause
fire, injury, or damage to surrounding objects.
- Do not short out, dismantle, or place batteries in a
fire.
• Dispose of used batteries according to your local
regulations.
• There is a battery mounted on the electronic circuit
board within the main unit. When disposing of the
main unit, do not dismantle the device or remove the
internal circuit board, and contact the shop where
you purchased the product or your local government
agency.
Light Module
1. A light module containing multiple laser diodes is
included in the product as the light source.
2. These laser diodes are sealed in the light module.
No maintenance or service is required for the perfor-
mance of the light module.
3. End user is not allowed to replace the light module.
4. Contact qualified distributor for light module replace-
ment and further information.
Disposing of your used product
EU-wide legislation as implemented in each
Member State requires that used electrical
and electronic products carrying the mark
(left) must be disposed of separately from
normal household waste.
This includes projectors and their electrical
accessories. When you dispose of such
products, please follow the guidance of your
local authority and/or ask the shop where you
purchased the product.
After collecting the used products, they are
reused and recycled in a proper way. This
effort will help us reduce the wastes as well
as the negative impact to the human health
and the environment at the minimum level.
The mark on the electrical and electronic
products only applies to the current European
Union Member States.
For EU: The crossed-out wheeled bin implies
that used batteries should not be put to the
general household waste! There is a separate
collection system for used batteries, to allow
proper treatment and recycling in accordance
with legislation.
According to EU directive 2006/66/EC, the
battery can't be disposed improperly. The
battery shall be separated to collect by
local service.
v
Important Information