Turning Off The Projector - NEC PH3501QL Installationsanleitung

4-6. Turning off the Projector

To turn off the projector:
1. First, press the
cabinet or the POWER OFF button on the remote control.
The [POWER OFF / ARE YOU SURE ?] message will ap-
pear.
2. Secondly, press the ENTER button or press the
(POWER) or the POWER OFF button again.
When the projector is in STANDBY MODE, the POWER
indicator lights up orange.
• Before the POWER indicator lights up orange, the
buzzer sound is released when [NOTIFICATION SET-
TING] for [BUZZER] is ON.
3. After the projector enters the standby state, turn off the projector power switch ([1]), then the light power
switch ([2]).
The POWER indicator will go off and the main power will turn off.
• While the POWER indicator is blinking green in short cycles, the power cannot be turned off.
ON
OFF
Light power switch
4. Return the administrator switch to the OFF position, then remove the administrator key.
Administrator key
Administrator switch
5. Turn off the AC power to the projector.
(POWER) button on the projector
4. Projector Adjustment and Connecting
Power On
Steady green light
Projector power switch
85
Standby
Steady orenge light
Press twice
OFF
ON