(2) Remove blocking panel B.
NOTE:
• After removing blocking panels A and B, be sure to store them in a safe
place.
3. Mount the LV unit onto the projector.
(1) Insert the LV unit by following the guide on either side of the slot.
(2) Tighten the screws (4) on the front of the LV unit to fasten.
NOTE:
• Set the LV unit's displays in the proper direction, according to the projec-
tor. Inserting the LV unit upside down can result in damage
• Tighten the screws securely.
This completes installing of the LV unit.
Next, attach the controls/indicator panel display label.
2. Configuring the projector's initial settings
guide (left/right)
60