Installing The Dcc On The Computer; Supported Devices - NEC PH3501QL Installationsanleitung

2-2-2. Installing the DCC on the computer

Overview of DCC
DCC is software for controlling and managing projectors via the network. A maximum of 20 units can be configured and
managed from a computer by connecting to the projectors via the network from a computer where DCC is installed.
TIP:
• DCC supports "English", "Chinese (Simplified)", and "Japanese" for display.

Supported devices

Contact your distributor for information about which devices are supported by DCC.
Operating environment of DCC
This software can be used with the personal computer that fills the following environments.
Supported OS
LAN environment
HDD capacity
(Note): Necessary capacity can vary by updating the DCC.
Installing the DCC
This section describes the installation procedure of DCC. Use the same procedure as for installation for version
upgrading (installation by overwriting).
Preparatory operation:
• Boot up your PC's Windows.
• If you have already started Windows, quit all running application programs.
If you do not quit all running programs before installing the DCC Software, you risk having unsuccessful installation.
NOTE
• About the privileges used during software installation and uninstallation
- For Windows 8/Windows 10
Perform as a user who has "Administrator" selected as the account type.
• On Windows 7, if the "User Account Control" window is displayed, click "Allow". On Windows 8/Windows 10, click "Yes".
1. Save the EXE file of the DCC in the local drive of the personal computer.
2. Double-click the EXE file that was saved.
The installer starts.
3. Install the DCC (version upgrading) according to the instruction of the installer.
DCC has now been installed (the version has been upgraded).
DCC uninstalling
Uninstall the Software from the menu shown below.
• For Windows 10
Right-click [Start] → [Control Panel] → [Uninstall a program]
• For Windows 8
Hold down the [Windows] key and press the [X] key → [Control Panel] → [Uninstall a program]
• For Windows 7
[Start] → [Control Panel] → [Programs] → [Programs and Features]
Microsoft Windows 7/8/8.1/10 (32-bit or 64-bit)
Microsoft Windows Server 2008/2012
Except for supported host names of standard TCP/IP, a fixed IP address is required
for most devices that are directly connected to a LAN.
70 MB or more is required for installation.
(Note)
2. Configuring the projector's initial settings
53